-
-
Adjustable Pole Band
- Pole Line Hardware
- Adjustable Pole Bands contains four 1/4" x 4" stampings, four 3/4" threaded studs and sixteen 3/4" Regular Square Nuts.
- Read more
-
-
-
ADSS Cable J Hook Suspension Clamp
- Pole Line Hardware
- J Hook Suspension Clamp is used for the direct suspension of round fiber optic ADSS cables with Ø10 to 20mm on short spans (max 100m) at intermediate poles on straight routes.
- Read more
-
-
-
Corner Suspension Cable Clamp
- Pole Line Hardware, Suspension Clamps
- Cable suspension clamp is used for attaching strands to corner poles, with a 5/8" through bolt to support messenger cable at poles with angular runs. The clamp consists of two mating plates, and two 5/8"-11 track bolts with attached square nuts.
- Read more
-
-
-
Double Offset Pole Bands
- Pole Line Hardware
- The Double Offset Pole Band is a metal band that is used to reinforce a utility pole. It is typically made of galvanized steel and is placed around the pole at a specific height to provide additional support and stability.
- Read more
-
-
-
Drive Hook
- Pole Line Hardware
- Drive Hook offered by China manufacturer professional sincerity building hardware. Material: AISI1018, Hot dipped galvanized. Length: 3-1/2'', 4-3/4'' Diameter：5/16'',7/16''
- Read more
-
-
-
Dual Forged EyeNut
- Pole Line Hardware
- Name:Chance PISA eyenuts Material:Forged Steel Specification:ANSI/IEEE Size:1" Application:Pole Line Hardware Or Other Fastener Packaging:Carton Box And Pallet Finish:Hot Dip Galvanized
- Read more
-
-
-
E Type Lashing Wire Clamp
- Pole Line Hardware
- The E type lashing wire clamp is fitted with a special clamp bolt formed with a shoulder to prevent turning while tightening. Both ends of the 1/4″ bolt are peened to prevent loss of nuts during shipment or handling.
- Read more
-
-
-
Formed Wire Dead-end for ADSS Cable
- Guy Grip & Accessories
- ADSS Optical cable strain clamp with small tension adopts aluminum clad steel wire or galvanized steel wire, which is mainly used in optical cable connection of strain tower, corner tower, middle connecting tower, and a terminal tower with distance, not over 100M.
- Read more
-
-
-
Long Shank Type Crossarm Pins
- Pole Line Hardware
- Name:Long Shark Type For Crossarm Pins Material:Material:carbon steel with nylon alloy top Finish:Hot Dip Galvanized Per ASTM A153 Class 3 Type:Insulator Pin Application:Pole Line Hardware Or Other Fastener Packaging: Carton Box And Pallet OEM:Accepted
- Read more
-
-
-
One Bolt Guy Wire Clamp
- Pole Line Hardware
- One Bolt Guy Wire Clamp comprised with 2 plates and one 1/2" X 1-1/2" Carriage Bolt with one Regular Square Nut.
- Read more
-
-
-
Plum Ping Hook For FTTH
- Stainless Steel Banding Strap
- Plum Ping Hook For FTTH is more suitable to mount on poles with stainless steel straps, it is widely used in FTTx projects, to fix drop cable wire anchoring clamps, and suspension clamps. The pole bracket for suspension clamp is used for optical fiber cable link fittings. It is fastened by stainless steel band on the pole.
- Read more
-
-
-
Preformed Dead End Tension Guy Grips
- Guy Grip & Accessories
- Preformed Dead End Tension Guy Grips made of galvanized steel wires and aluminum oxide inside to prevent sliding of the cable. Installed on the terminal tower, tight tension tower and intersection angle tower etc.
- Read more
-
-
-
Rolled Point Galvanized Staple
- Pole Line Hardware
- Rolled Point Galvanized Staple are used to secure ground wire and molding to telephone poles.
- Read more
-
-
-
Single Offset Pole Bands
- Pole Line Hardware
- Single Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. All components are hot dip galvanized to meet ASTM Specification A153.
- Read more
-
-
-
Spike Head Pole Step
- Pole Line Hardware
- Spike Head Pole Step made of galvanized steel, pole stels are installed on the power pole to enable line workers to climb poles to perform maintenance
- Read more
-
-
-
Three Bolt Guy Wire Clamp
- Pole Line Hardware, Suspension Clamps
- Three Bolt Guy Clamp. Parallel grooves trap strand tightly without marring. Each bolt has a shoulder to prevent turning while tightening. Hot dip galvanized.
- Read more
-
